What is the fuel capacity of BMW Motorrad F 800 GS OEM standard specification?
4.0 gal
The cited OEM source lists Usable fuel tank for BMW Motorrad F 800 GS OEM standard specification as 4.0 gal.
SOURCED MODEL TECHNICAL DATA
BMW Motorrad F 800 GS OEM standard specification Oil, Fluid Capacities & Technical Data
BMW Motorrad F 800 GS OEM standard specification — Usable fuel tank: 4.0 gal · Engine displacement: 895 cc · Engine power: 87 hp Sources, symptoms, measurements and verification on one page.
Quick answers
What is the engine displacement of BMW Motorrad F 800 GS OEM standard specification?
895 cc
The cited OEM source lists Engine displacement for BMW Motorrad F 800 GS OEM standard specification as 895 cc.
What is the power rating of BMW Motorrad F 800 GS OEM standard specification?
87 hp
The cited OEM source lists Engine power for BMW Motorrad F 800 GS OEM standard specification as 87 hp.
What is the power rating of BMW Motorrad F 800 GS OEM standard specification?
6750 rpm
The cited OEM source lists Power rpm for BMW Motorrad F 800 GS OEM standard specification as 6750 rpm.
What is the torque rating of BMW Motorrad F 800 GS OEM standard specification?
67 lb-ft
The cited OEM source lists Maximum torque for BMW Motorrad F 800 GS OEM standard specification as 67 lb-ft.
What is the torque rating of BMW Motorrad F 800 GS OEM standard specification?
6750 rpm
The cited OEM source lists Torque rpm for BMW Motorrad F 800 GS OEM standard specification as 6750 rpm.
What is the Alternator value for BMW Motorrad F 800 GS OEM standard specification?
416 W
The cited OEM source lists Alternator for BMW Motorrad F 800 GS OEM standard specification as 416 W.
What is the battery capacity of BMW Motorrad F 800 GS OEM standard specification?
9 Ah
The cited OEM source lists Battery capacity for BMW Motorrad F 800 GS OEM standard specification as 9 Ah.
Quick technical specification
Engine displacement
895 cc
Engine power
87 hp
Power rpm
6750 rpm
Maximum torque
67 lb-ft
Torque rpm
6750 rpm
Alternator
416 W
Battery capacity
9 Ah
Oil, fluids, energy and capacities
Usable fuel tank
4.0 gal
Expected values / measurement references
Engine displacement
895 cc
Engine power
87 hp
Power rpm
6750 rpm
Maximum torque
67 lb-ft
Torque rpm
6750 rpm
Alternator
416 W
Battery capacity
9 Ah
Usable fuel tank
4.0 gal
Model-specific OEM reference checks
F 800 GS OEM standard specification: published Engine displacement reference is 895 cc. Measurements on the same variant/year scope should use this value as the reference.
F 800 GS OEM standard specification: published Engine power reference is 87 hp. Measurements on the same variant/year scope should use this value as the reference.
F 800 GS OEM standard specification: published Power rpm reference is 6750 rpm. Measurements on the same variant/year scope should use this value as the reference.
F 800 GS OEM standard specification: published Maximum torque reference is 67 lb-ft. Measurements on the same variant/year scope should use this value as the reference.
F 800 GS OEM standard specification: published Torque rpm reference is 6750 rpm. Measurements on the same variant/year scope should use this value as the reference.
F 800 GS OEM standard specification: published Alternator reference is 416 W. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Interrupted or inconsistent throttle response
Unstable idle or misfire
ABS/DTC warning
Starting or charging problem
Measurement and test approach
Measure battery resting voltage and cranking voltage, then charging voltage at multiple engine speeds.
Record requested/actual throttle position, lambda and manifold pressure during the same acceleration event.
Compare ABS wheel-speed signals from low speed upward.
Root-cause discrimination
Separate fuel/ignition faults from ride-by-wire torque limitation.
For ABS/DTC warnings, separate wheel-sensor gap/signal faults from IMU/ECU communication faults.
DTC / SPN / FMI context
Preserve manufacturer DTCs, freeze-frame and ABS/IMU subcodes together.
Post-repair verification
Repeat cold/hot starts, idle, medium load and a controlled braking cycle; warnings must not return.
Electrical and network
12 V charging system, engine ECU, ABS/IMU and ride-by-wire/riding-mode signals are evaluated together.
Sensors, actuators and observation points
F 800 GS OEM standard specification: Throttle position and requested torque.
F 800 GS OEM standard specification: Lambda, intake pressure and coolant temperature.
F 800 GS OEM standard specification: Wheel speed, IMU and ABS intervention.
F 800 GS OEM standard specification: Charging voltage and battery state.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.