How much engine oil does Yamaha Outboards F150 F150 Tiller 25in take?
4.5/4.3 L
The cited OEM source lists Engine oil capacity published pair for Yamaha Outboards F150 F150 Tiller 25in as 4.5/4.3 L.
SOURCED MODEL TECHNICAL DATA
Yamaha Outboards F150 F150 Tiller 25in Oil, Fluid Capacities & Technical Data
Yamaha Outboards F150 F150 Tiller 25in — Engine oil capacity published pair: 4.5/4.3 L · Engine displacement: 2.8 L · Prop shaft horsepower: 150 hp Sources, symptoms, measurements and verification on one page.
Quick answers
What is the engine displacement of Yamaha Outboards F150 F150 Tiller 25in?
2.8 L
The cited OEM source lists Engine displacement for Yamaha Outboards F150 F150 Tiller 25in as 2.8 L.
What is the power rating of Yamaha Outboards F150 F150 Tiller 25in?
150 hp
The cited OEM source lists Prop shaft horsepower for Yamaha Outboards F150 F150 Tiller 25in as 150 hp.
What is the power rating of Yamaha Outboards F150 F150 Tiller 25in?
5500 rpm
The cited OEM source lists Power speed for Yamaha Outboards F150 F150 Tiller 25in as 5500 rpm.
What is the Full throttle lower rpm value for Yamaha Outboards F150 F150 Tiller 25in?
5000 rpm
The cited OEM source lists Full throttle lower rpm for Yamaha Outboards F150 F150 Tiller 25in as 5000 rpm.
What is the Full throttle upper rpm value for Yamaha Outboards F150 F150 Tiller 25in?
6000 rpm
The cited OEM source lists Full throttle upper rpm for Yamaha Outboards F150 F150 Tiller 25in as 6000 rpm.
What is the Alternator output value for Yamaha Outboards F150 F150 Tiller 25in?
50 A
The cited OEM source lists Alternator output for Yamaha Outboards F150 F150 Tiller 25in as 50 A.
What is the Compression ratio value for Yamaha Outboards F150 F150 Tiller 25in?
10.3 :1
The cited OEM source lists Compression ratio for Yamaha Outboards F150 F150 Tiller 25in as 10.3 :1.
Quick technical specification
Engine displacement
2.8 L
Prop shaft horsepower
150 hp
Power speed
5500 rpm
Full throttle lower rpm
5000 rpm
Full throttle upper rpm
6000 rpm
Alternator output
50 A
Compression ratio
10.3 :1
Recommended octane
89 octane
Gear ratio
2.0 :1
Weight
257 kg
Oil, fluids, energy and capacities
Engine oil capacity published pair
4.5/4.3 L
Expected values / measurement references
Engine displacement
2.8 L
Prop shaft horsepower
150 hp
Power speed
5500 rpm
Engine oil capacity published pair
4.5/4.3 L
Model-specific OEM reference checks
F150 F150 Tiller 25in: OEM-published Engine displacement reference is 2.8 L. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
F150 F150 Tiller 25in: OEM-published Prop shaft horsepower reference is 150 hp. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
F150 F150 Tiller 25in: OEM-published Power speed reference is 5500 rpm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
F150 F150 Tiller 25in: OEM-published Full throttle lower rpm reference is 5000 rpm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Failure to reach target WOT rpm / power loss
Overheating or cooling-water flow issue
Low charging output or unstable idle
Measurement and test approach
Compare full-throttle WOT rpm with the manufacturer range; record throttle opening and boat-load condition to separate propeller loading from fuel/ignition/compression faults.
Verify engine-oil capacity, charging amperage, spark plug and fuel-octane requirement against the OEM reference in this model record.
Root-cause discrimination
If WOT is low, first separate propeller pitch/boat load from engine air-fuel-ignition/compression output.
DTC / SPN / FMI context
When ECM faults are present, preserve rpm, trim, temperature and load condition.
Post-repair verification
After dock checks, verify idle, mid-load and WOT range plus cooling and charging behavior in a controlled on-water test.
Maintenance / service reference
F150: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
F150: Evaluate ECM, gauge/command-link, trim and charging system together.
Sensors, actuators and observation points
F150: TPS and engine rpm.
F150: MAP/intake temperature and fuel injection.
F150: Cooling-water/engine temperature.
F150: Alternator/charging output.
F150: Trim/tilt position.
F150: ECM fault/freeze data.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.