PEUGEOT 3008 2008–

Variant identity

Model family

3008

Market/region

France

Period/status

2008– • Current sale / production

Platform/generation

T84/P84/P64

Powertrain/energy/driveline

SUV Gasoline, diesel, hybrid, PHEV, BEV

Research focus: II nesil EMP2 ile III STLA Medium; i-Cockpit, EAT8/e-DCS6, HV ve recall.

System map

• Evaluate fuel supply, rail target/actual pressure, injector balance, charge-air path and EGR/DPF/SCR in the same event capture.
• ICE, HV/48 V, 12 V, DC-DC, motor-generator, regeneration and thermal management are layers of one energy chain.
• HV battery, BMS, isolation, inverter, OBC/DC-DC, 12 V and thermal management are separate evidence chains.
• Recall/service-campaign scope is verified by VIN/market/production break, not model name alone.

Measurement and verification sequence

1. Capture low-pressure supply, rail target/actual, MAF/MAP, boost and exhaust temperature during crank and load.
2. Compare SoC, cell deviation, DC-DC output, motor torque request, regeneration and ICE engagement conditions in one capture.
3. During READY/charging, monitor pack temperatures, cell delta, isolation, 12 V and charging-power curve together.

Misdiagnosis traps

• Displayed range or one SoH value alone does not prove battery health.
• No complaint does not mean there is no open campaign.

Variant-specific system split

• Fuel path is separated into low-side supply → high-pressure pump → rail → injectors; air path into MAF/MAP → turbo control → intake manifold.
• ICE, 12 V, HV/48 V, DC-DC, motor-generator and thermal management are separate control layers; energy flow is aligned with the fault event.
• In an EV, HV battery/BMS, contactor-HVIL/isolation, inverter-motor, OBC/DC-DC, 12 V and cooling circuits are separate evidence branches.
• On torque-converter automatics, TCC slip, input/output speeds, commanded/actual ratio, fluid temperature and line-pressure control are tracked separately.

Freeze frame / live data

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Live data: rail target/actual, low-side supply where supported, MAF/MAP, boost target/actual, EGR command/feedback.
• Aftertreatment: DPF differential pressure, soot/ash calculations, EGT chain, NOx in/out and SCR/DEF dosing enable.
• Electrified layer: SOC/SOH where available, cell delta, pack temperatures, HVIL/isolation, contactor permission, DC-DC output and 12 V voltage.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.

Root-cause split

• If rail pressure is low, separate low-side supply from high-pressure generation: when physical low-side supply is healthy but rail cannot follow target, regulation/pump/injector-leakage branches gain weight.
• For low boost, do not jump to turbo replacement: separate MAF/MAP plausibility, charge leak, VGT/wastegate command and exhaust backpressure at the same load point.
• For READY/charging faults, separate 12 V supply from the HV permission chain first; low 12 V can mimic contactor/HVIL/isolation faults.
• For battery performance, use cell delta, temperature spread and voltage deviation under load/charge instead of one SoH percentage alone.
• On torque-converter automatics, separate TCC slip from actual gear-ratio error; temperature-dependent line-pressure/solenoid behavior can mimic mechanical clutch faults.

What should be verified first?

Model name alone is insufficient. Do not generalize parts fitment, chronic issues or service procedures until production period, market, platform/generation, powertrain, transmission and controller identity are matched.

Model family dossier → · Engine Atlas → · Transmission Atlas → · Recall →