PEUGEOT 308 I–II 2007–2021

Variant identity

Model family

308 I–II

Market/region

France

Period/status

2007–2021 • Status requires source verification

Platform/generation

T7/T9

Powertrain/energy/driveline

Powertrain identity requires source verification

Research focus: verify platform/generation, powertrain/energy/driveline and market-specific application identity against manufacturer/source records before applying parts, service procedures or chronic-fault claims.

System map

• Evaluate fuel supply, rail target/actual pressure, injector balance, charge-air path and EGR/DPF/SCR in the same event capture.

Measurement and verification sequence

1. Capture low-pressure supply, rail target/actual, MAF/MAP, boost and exhaust temperature during crank and load.

Misdiagnosis traps

• A single DTC or user symptom is not a parts diagnosis; confirm with measurements and physical evidence.

Variant-specific system split

• Fuel path is separated into low-side supply → high-pressure pump → rail → injectors; air path into MAF/MAP → turbo control → intake manifold.
• On turbo-petrol architecture, load calculation, boost target/actual, lambda/fuel trim, ignition and knock control are compared in the same event window.
• On torque-converter automatics, TCC slip, input/output speeds, commanded/actual ratio, fluid temperature and line-pressure control are tracked separately.

Freeze frame / live data

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Live data: rail target/actual, low-side supply where supported, MAF/MAP, boost target/actual, EGR command/feedback.
• Aftertreatment: DPF differential pressure, soot/ash calculations, EGT chain, NOx in/out and SCR/DEF dosing enable.
• Live data: calculated load, MAP/boost target-actual, throttle angle, lambda/O2, STFT/LTFT, ignition advance and knock retard.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.

Root-cause split

• If rail pressure is low, separate low-side supply from high-pressure generation: when physical low-side supply is healthy but rail cannot follow target, regulation/pump/injector-leakage branches gain weight.
• For low boost, do not jump to turbo replacement: separate MAF/MAP plausibility, charge leak, VGT/wastegate command and exhaust backpressure at the same load point.
• On lean/misfire/boost complaints, align fuel trim, lambda, ignition retard and boost deviation on one time base to separate air leak, fuel-delivery and ignition causes.
• On torque-converter automatics, separate TCC slip from actual gear-ratio error; temperature-dependent line-pressure/solenoid behavior can mimic mechanical clutch faults.

What should be verified first?

Model name alone is insufficient. Do not generalize parts fitment, chronic issues or service procedures until production period, market, platform/generation, powertrain, transmission and controller identity are matched.

Model family dossier → · Engine Atlas → · Transmission Atlas → · Recall →