FERRARI 12Cilindri / Spider 2024–

Variant identity

Model family

12Cilindri / Spider

Market/region

Italy

Period/status

2024– • Current sale / production

Platform/generation

F167

Powertrain/energy/driveline

V12 GT 6.5 V12, 8DCT

Research focus: verify platform/generation, powertrain/energy/driveline and market-specific application identity against manufacturer/source records before applying parts, service procedures or chronic-fault claims.

System map

• HV battery, BMS, isolation, inverter, OBC/DC-DC, 12 V and thermal management are separate evidence chains.
• Read clutch, mechatronics/TCU, actuator pressure, input/output speeds and adaptations together.

Measurement and verification sequence

1. During READY/charging, monitor pack temperatures, cell delta, isolation, 12 V and charging-power curve together.
2. Record cold/hot shifts, slip, input/output speed delta and actuator/line-pressure behaviour.

Misdiagnosis traps

• Displayed range or one SoH value alone does not prove battery health.

Variant-specific system split

• In an EV, HV battery/BMS, contactor-HVIL/isolation, inverter-motor, OBC/DC-DC, 12 V and cooling circuits are separate evidence branches.
• For DCT/DSG, TCU-mechatronics, K1/K2 clutches, actuator/line pressure and input/output speeds are evaluated together.

Freeze frame / live data

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Electrified layer: SOC/SOH where available, cell delta, pack temperatures, HVIL/isolation, contactor permission, DC-DC output and 12 V voltage.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.

Root-cause split

• For READY/charging faults, separate 12 V supply from the HV permission chain first; low 12 V can mimic contactor/HVIL/isolation faults.
• For battery performance, use cell delta, temperature spread and voltage deviation under load/charge instead of one SoH percentage alone.
• For DCT harshness/slip, separate TCU command from clutch slip and actuator/hydraulic response; adaptation result alone does not prove mechanical wear.

What should be verified first?

Model name alone is insufficient. Do not generalize parts fitment, chronic issues or service procedures until production period, market, platform/generation, powertrain, transmission and controller identity are matched.

Model family dossier → · Engine Atlas → · Transmission Atlas → · Recall →