What is the power rating of BMW Motorrad CE 04 OEM standard specification?
42 hp
The cited OEM source lists Engine power for BMW Motorrad CE 04 OEM standard specification as 42 hp.
SOURCED MODEL TECHNICAL DATA
BMW Motorrad CE 04 OEM standard specification Technical Specs, Power/Torque & Measurements
BMW Motorrad CE 04 OEM standard specification — Engine power: 42 hp · Power rpm: 4900 rpm · Maximum torque: 45 lb-ft Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of BMW Motorrad CE 04 OEM standard specification?
4900 rpm
The cited OEM source lists Power rpm for BMW Motorrad CE 04 OEM standard specification as 4900 rpm.
What is the torque rating of BMW Motorrad CE 04 OEM standard specification?
45 lb-ft
The cited OEM source lists Maximum torque for BMW Motorrad CE 04 OEM standard specification as 45 lb-ft.
What is the Range reference value for BMW Motorrad CE 04 OEM standard specification?
80 mile
The cited OEM source lists Range reference for BMW Motorrad CE 04 OEM standard specification as 80 mile.
What is the 0-80% fast charge value for BMW Motorrad CE 04 OEM standard specification?
65 min
The cited OEM source lists 0-80% fast charge for BMW Motorrad CE 04 OEM standard specification as 65 min.
Quick technical specification
Engine power
42 hp
Power rpm
4900 rpm
Maximum torque
45 lb-ft
Range reference
80 mile
0-80% fast charge
65 min
Expected values / measurement references
Engine power
42 hp
Power rpm
4900 rpm
Maximum torque
45 lb-ft
Range reference
80 mile
0-80% fast charge
65 min
Model-specific OEM reference checks
CE 04 OEM standard specification: published Engine power reference is 42 hp. Measurements on the same variant/year scope should use this value as the reference.
CE 04 OEM standard specification: published Power rpm reference is 4900 rpm. Measurements on the same variant/year scope should use this value as the reference.
CE 04 OEM standard specification: published Maximum torque reference is 45 lb-ft. Measurements on the same variant/year scope should use this value as the reference.
CE 04 OEM standard specification: published Range reference reference is 80 mile. Measurements on the same variant/year scope should use this value as the reference.
CE 04 OEM standard specification: published 0-80% fast charge reference is 65 min. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Interrupted or inconsistent throttle response
Unstable idle or misfire
ABS/DTC warning
Starting or charging problem
Measurement and test approach
Measure battery resting voltage and cranking voltage, then charging voltage at multiple engine speeds.
Record requested/actual throttle position, lambda and manifold pressure during the same acceleration event.
Compare ABS wheel-speed signals from low speed upward.
Root-cause discrimination
Separate fuel/ignition faults from ride-by-wire torque limitation.
For ABS/DTC warnings, separate wheel-sensor gap/signal faults from IMU/ECU communication faults.
DTC / SPN / FMI context
Preserve manufacturer DTCs, freeze-frame and ABS/IMU subcodes together.
Post-repair verification
Repeat cold/hot starts, idle, medium load and a controlled braking cycle; warnings must not return.
Electrical and network
12 V charging system, engine ECU, ABS/IMU and ride-by-wire/riding-mode signals are evaluated together.
Sensors, actuators and observation points
CE 04 OEM standard specification: Throttle position and requested torque.
CE 04 OEM standard specification: Lambda, intake pressure and coolant temperature.
CE 04 OEM standard specification: Wheel speed, IMU and ABS intervention.
CE 04 OEM standard specification: Charging voltage and battery state.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.