What is the fuel capacity of BMW Motorrad S 1000 RR M Package configuration?
4.3 gal
The cited OEM source lists Usable fuel tank for BMW Motorrad S 1000 RR M Package configuration as 4.3 gal.
BMW Motorrad S 1000 RR M Package configuration — Usable fuel tank: 4.3 gal · Engine displacement: 999 cc · Engine power: 205 hp Sources, symptoms, measurements and verification on one page.
4.3 gal
The cited OEM source lists Usable fuel tank for BMW Motorrad S 1000 RR M Package configuration as 4.3 gal.
999 cc
The cited OEM source lists Engine displacement for BMW Motorrad S 1000 RR M Package configuration as 999 cc.
205 hp
The cited OEM source lists Engine power for BMW Motorrad S 1000 RR M Package configuration as 205 hp.
13000 rpm
The cited OEM source lists Power rpm for BMW Motorrad S 1000 RR M Package configuration as 13000 rpm.
83 lb-ft
The cited OEM source lists Maximum torque for BMW Motorrad S 1000 RR M Package configuration as 83 lb-ft.
11000 rpm
The cited OEM source lists Torque rpm for BMW Motorrad S 1000 RR M Package configuration as 11000 rpm.
450 W
The cited OEM source lists Alternator for BMW Motorrad S 1000 RR M Package configuration as 450 W.
5 Ah
The cited OEM source lists Battery capacity for BMW Motorrad S 1000 RR M Package configuration as 5 Ah.
999 cc
205 hp
13000 rpm
83 lb-ft
11000 rpm
450 W
5 Ah
4.3 gal
999 cc
205 hp
13000 rpm
83 lb-ft
11000 rpm
450 W
5 Ah
4.3 gal
S 1000 RR M Package configuration: published Engine displacement reference is 999 cc. Measurements on the same variant/year scope should use this value as the reference.
S 1000 RR M Package configuration: published Engine power reference is 205 hp. Measurements on the same variant/year scope should use this value as the reference.
S 1000 RR M Package configuration: published Power rpm reference is 13000 rpm. Measurements on the same variant/year scope should use this value as the reference.
S 1000 RR M Package configuration: published Maximum torque reference is 83 lb-ft. Measurements on the same variant/year scope should use this value as the reference.
S 1000 RR M Package configuration: published Torque rpm reference is 11000 rpm. Measurements on the same variant/year scope should use this value as the reference.
S 1000 RR M Package configuration: published Alternator reference is 450 W. Measurements on the same variant/year scope should use this value as the reference.
Interrupted or inconsistent throttle response
Unstable idle or misfire
ABS/DTC warning
Starting or charging problem
Measure battery resting voltage and cranking voltage, then charging voltage at multiple engine speeds.
Record requested/actual throttle position, lambda and manifold pressure during the same acceleration event.
Compare ABS wheel-speed signals from low speed upward.
Separate fuel/ignition faults from ride-by-wire torque limitation.
For ABS/DTC warnings, separate wheel-sensor gap/signal faults from IMU/ECU communication faults.
Preserve manufacturer DTCs, freeze-frame and ABS/IMU subcodes together.
Repeat cold/hot starts, idle, medium load and a controlled braking cycle; warnings must not return.
12 V charging system, engine ECU, ABS/IMU and ride-by-wire/riding-mode signals are evaluated together.
S 1000 RR M Package configuration: Throttle position and requested torque.
S 1000 RR M Package configuration: Lambda, intake pressure and coolant temperature.
S 1000 RR M Package configuration: Wheel speed, IMU and ABS intervention.
S 1000 RR M Package configuration: Charging voltage and battery state.
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.