What is the fuel capacity of Polaris RANGER 1000 Standard?
43 L
The cited OEM source lists Fuel capacity for Polaris RANGER 1000 Standard as 43 L.
SOURCED MODEL TECHNICAL DATA
Polaris RANGER 1000 Standard Oil, Fluid Capacities & Technical Data
Polaris RANGER 1000 Standard — Fuel capacity: 43 L · Engine oil capacity: 2.4 L · Coolant capacity: 4.75 L Sources, symptoms, measurements and verification on one page.
Quick answers
How much engine oil does Polaris RANGER 1000 Standard take?
2.4 L
The cited OEM source lists Engine oil capacity for Polaris RANGER 1000 Standard as 2.4 L.
What is the coolant capacity of Polaris RANGER 1000 Standard?
4.75 L
The cited OEM source lists Coolant capacity for Polaris RANGER 1000 Standard as 4.75 L.
What is the Payload value for Polaris RANGER 1000 Standard?
1500 lb
The cited OEM source lists Payload for Polaris RANGER 1000 Standard as 1500 lb.
What is the towing capacity of Polaris RANGER 1000 Standard?
2500 lb
The cited OEM source lists Towing capacity for Polaris RANGER 1000 Standard as 2500 lb.
What is the Length value for Polaris RANGER 1000 Standard?
120 in
The cited OEM source lists Length for Polaris RANGER 1000 Standard as 120 in.
What is the Width value for Polaris RANGER 1000 Standard?
62.5 in
The cited OEM source lists Width for Polaris RANGER 1000 Standard as 62.5 in.
What is the Ground clearance value for Polaris RANGER 1000 Standard?
12 in
The cited OEM source lists Ground clearance for Polaris RANGER 1000 Standard as 12 in.
Quick technical specification
Payload
1500 lb
Towing capacity
2500 lb
Length
120 in
Width
62.5 in
Ground clearance
12 in
Wheelbase
81 in
Turning radius
160 in
Oil, fluids, energy and capacities
Fuel capacity
43 L
Engine oil capacity
2.4 L
Coolant capacity
4.75 L
Expected values / measurement references
Payload
1500 lb
Towing capacity
2500 lb
Length
120 in
Fuel capacity
43 L
Engine oil capacity
2.4 L
Model-specific OEM reference checks
RANGER 1000 Standard: OEM-published Payload reference is 1500 lb. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RANGER 1000 Standard: OEM-published Towing capacity reference is 2500 lb. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RANGER 1000 Standard: OEM-published Length reference is 120 in. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RANGER 1000 Standard: OEM-published Width reference is 62.5 in. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
CVT/PVT belt slip, traction loss or excessive rpm
Overheating or cooling-fan engagement issue
AWD/demand-drive engagement issue or engine fault code
Measurement and test approach
Compare engine-oil, coolant, demand-drive and transmission-fluid levels with model capacities; incorrect levels can mimic PVT/gearcase complaints.
Log engine RPM, throttle, coolant temperature, AWD command and error-code freeze data at the event.
Root-cause discrimination
Separate PVT belt wear from engine power loss by correlating engine rpm with vehicle acceleration and inspecting belt/clutch condition.
DTC / SPN / FMI context
Preserve display fault code with sub-code/event condition; eliminate low-supply-voltage induced multiple faults first.
Post-repair verification
Verify cold/hot operation, 2WD/AWD transitions, low/high-speed PVT cycles and fan engagement.
Maintenance / service reference
PS-4 5W-50 engine oil; crankcase drain plug 12 ft-lb (16 Nm).
Electrical and network
RANGER 1000: Evaluate engine ECU, AWD/demand-drive, cluster and charging network together.
Sensors, actuators and observation points
RANGER 1000: TPS and engine rpm.
RANGER 1000: Coolant temperature/fan command.
RANGER 1000: AWD/demand-drive command.
RANGER 1000: PVT/CVT speed relationship.
RANGER 1000: Battery/charging system.
RANGER 1000: Gear/gearcase position inputs.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.