What is the fuel capacity of Toyota Corolla SE?
13.2 US gal
The cited OEM source lists Fuel tank for Toyota Corolla SE as 13.2 US gal.
SOURCED MODEL TECHNICAL DATA
Toyota Corolla SE Oil, Fluid Capacities & Technical Data
Toyota Corolla SE — Fuel tank: 13.2 US gal · Engine displacement: 2.0 L · Power: 169 hp Sources, symptoms, measurements and verification on one page.
Quick answers
What is the engine displacement of Toyota Corolla SE?
2.0 L
The cited OEM source lists Engine displacement for Toyota Corolla SE as 2.0 L.
What is the power rating of Toyota Corolla SE?
169 hp
The cited OEM source lists Power for Toyota Corolla SE as 169 hp.
What is the torque rating of Toyota Corolla SE?
151 lb-ft
The cited OEM source lists Torque for Toyota Corolla SE as 151 lb-ft.
What is the EPA city up to value for Toyota Corolla SE?
32 mpg
The cited OEM source lists EPA city up to for Toyota Corolla SE as 32 mpg.
What is the EPA highway up to value for Toyota Corolla SE?
41 mpg
The cited OEM source lists EPA highway up to for Toyota Corolla SE as 41 mpg.
What is the EPA combined up to value for Toyota Corolla SE?
35 mpg
The cited OEM source lists EPA combined up to for Toyota Corolla SE as 35 mpg.
What is the Cylinders value for Toyota Corolla SE?
4
The cited OEM source lists Cylinders for Toyota Corolla SE as 4.
Quick technical specification
Engine displacement
2.0 L
Power
169 hp
Torque
151 lb-ft
EPA city up to
32 mpg
EPA highway up to
41 mpg
EPA combined up to
35 mpg
Cylinders
4
Valves
16
Oil, fluids, energy and capacities
Fuel tank
13.2 US gal
Expected values / measurement references
Engine displacement
2.0 L
Power
169 hp
Torque
151 lb-ft
Fuel tank
13.2 US gal
Model-specific OEM reference checks
Corolla SE: OEM-published Engine displacement reference is 2.0 L. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Corolla SE: OEM-published Power reference is 169 hp. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Corolla SE: OEM-published Torque reference is 151 lb-ft. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Corolla SE: OEM-published EPA city up to reference is 32 mpg. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Reduced pull, unstable idle or high fuel consumption
Harsh/delayed shifting or transmission-temperature warning
Starting/charging problem or network communication warnings
Measurement and test approach
Log fuel pressure, MAP/MAF, lambda, ignition correction and misfire counters together under load; exact thresholds must come from OEM service data for the engine calibration.
For transmission complaints, compare input/output speeds, requested/actual gear, converter/clutch slip and oil temperature during the same event.
Root-cause discrimination
Separate engine torque-production faults from transmission slip by correlating ECU calculated torque, engine speed and input/output speeds.
DTC / SPN / FMI context
Preserve DTC freeze-frame and pending/permanent state; with multiple power/ground/network codes, eliminate common supply causes first.
Post-repair verification
No fault should return across cold/hot restarts, full-load acceleration, steady cruise and stop-start cycles.
Maintenance / service reference
Corolla: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
Corolla: Evaluate engine ECU, transmission TCM, ABS/ESC and body CAN network together.
Sensors, actuators and observation points
Corolla: MAF/MAP and intake temperature.
Corolla: Fuel-pressure sensor / pump command.
Corolla: Lambda/O2 and fuel trims.
Corolla: Crank/cam synchronization and misfire counters.
Corolla: Transmission input/output speed sensors.
Corolla: Battery/alternator/ground voltage drop.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.