How much engine oil does Yamaha Outboards T60 20in High Thrust take?
2.1 L
The cited OEM source lists Engine oil capacity for Yamaha Outboards T60 20in High Thrust as 2.1 L.
SOURCED MODEL TECHNICAL DATA
Yamaha Outboards T60 20in High Thrust Oil, Fluid Capacities & Technical Data
Yamaha Outboards T60 20in High Thrust — Engine oil capacity: 2.1 L · Prop/jet shaft horsepower: 60 hp · Engine displacement: 1.0 L Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Yamaha Outboards T60 20in High Thrust?
60 hp
The cited OEM source lists Prop/jet shaft horsepower for Yamaha Outboards T60 20in High Thrust as 60 hp.
What is the engine displacement of Yamaha Outboards T60 20in High Thrust?
1.0 L
The cited OEM source lists Engine displacement for Yamaha Outboards T60 20in High Thrust as 1.0 L.
What is the WOT lower rpm value for Yamaha Outboards T60 20in High Thrust?
5000 rpm
The cited OEM source lists WOT lower rpm for Yamaha Outboards T60 20in High Thrust as 5000 rpm.
What is the WOT upper rpm value for Yamaha Outboards T60 20in High Thrust?
6000 rpm
The cited OEM source lists WOT upper rpm for Yamaha Outboards T60 20in High Thrust as 6000 rpm.
What is the Alternator output value for Yamaha Outboards T60 20in High Thrust?
16 A
The cited OEM source lists Alternator output for Yamaha Outboards T60 20in High Thrust as 16 A.
What is the Compression ratio value for Yamaha Outboards T60 20in High Thrust?
9.5 :1
The cited OEM source lists Compression ratio for Yamaha Outboards T60 20in High Thrust as 9.5 :1.
What is the Gear ratio value for Yamaha Outboards T60 20in High Thrust?
2.33 :1
The cited OEM source lists Gear ratio for Yamaha Outboards T60 20in High Thrust as 2.33 :1.
Quick technical specification
Prop/jet shaft horsepower
60 hp
Engine displacement
1.0 L
WOT lower rpm
5000 rpm
WOT upper rpm
6000 rpm
Alternator output
16 A
Compression ratio
9.5 :1
Gear ratio
2.33 :1
Oil, fluids, energy and capacities
Engine oil capacity
2.1 L
Expected values / measurement references
Prop/jet shaft horsepower
60 hp
Engine displacement
1.0 L
WOT lower rpm
5000 rpm
WOT upper rpm
6000 rpm
Alternator output
16 A
Compression ratio
9.5 :1
Gear ratio
2.33 :1
Engine oil capacity
2.1 L
Model-specific OEM reference checks
T60 20in High Thrust: published Prop/jet shaft horsepower reference is 60 hp. Measurements on the same variant/year scope should use this value as the reference.
T60 20in High Thrust: published Engine displacement reference is 1.0 L. Measurements on the same variant/year scope should use this value as the reference.
T60 20in High Thrust: published WOT lower rpm reference is 5000 rpm. Measurements on the same variant/year scope should use this value as the reference.
T60 20in High Thrust: published WOT upper rpm reference is 6000 rpm. Measurements on the same variant/year scope should use this value as the reference.
T60 20in High Thrust: published Alternator output reference is 16 A. Measurements on the same variant/year scope should use this value as the reference.
T60 20in High Thrust: published Compression ratio reference is 9.5 :1. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Cannot reach specified WOT RPM
Temperature alarm
Unstable idle
Charging or trim problem
Measurement and test approach
Record actual WOT RPM with the correct propeller and load condition.
Monitor cooling-water flow and engine temperature under load.
Measure charging current/voltage and battery-connection voltage drop.
Root-cause discrimination
Separate propeller/load mismatch from engine fuel or ignition faults.
For a temperature alarm, separate water inlet/impeller/thermostat faults from the sensor circuit.
DTC / SPN / FMI context
Preserve Yamaha ECU fault history, overheat/oil-pressure events and network alarms, where equipped, together.
Post-repair verification
At idle, cruise and WOT load, temperature, charging and RPM should remain stable and the alarm must not return.
Electrical and network
12 V starting/charging, ECU, trim/tilt and Command Link/Helm Master data are evaluated together.
Sensors, actuators and observation points
T60 20in High Thrust: Engine RPM, throttle and load.
T60 20in High Thrust: Cooling-water/engine temperature.
T60 20in High Thrust: Fuel pressure and injector command.
T60 20in High Thrust: Trim angle and charging current.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.