Hyundai IONIQ 5 Long Range AWD 84 kWh Oil, Fluid Capacities & Technical Data

239 kW

325 PS

605 Nm

5.3 s

18 min

84 kWh

239 kW

325 PS

605 Nm

84 kWh

IONIQ 5 Long Range AWD 84 kWh: OEM-published Drive power reference is 239 kW. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.

IONIQ 5 Long Range AWD 84 kWh: OEM-published Power reference is 325 PS. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.

IONIQ 5 Long Range AWD 84 kWh: OEM-published Torque reference is 605 Nm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.

IONIQ 5 Long Range AWD 84 kWh: OEM-published 0-100 km/h reference is 5.3 s. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.

Reduced DC fast-charge rate or interrupted charging

Range loss, power limitation or battery thermal warning

AWD/drive-system warning or loss of torque at one axle

Log HV battery SOC, pack temperature spread, block/cell voltage deviation, requested and actual DC charge current/voltage on the same time base.

During NACS/AC charging, verify pilot/CP state, onboard-charger input/output power and 12 V DC/DC behavior.

Differentiate charger-side power limits from vehicle thermal/HV limits by comparing offered charger power, vehicle request and battery temperature together.

For range loss, separate tire/drag, HVAC load and usable battery-energy effects.

For HV isolation, battery ECU, inverter/e-axle and charging DTCs, do not replace parts without sub-code/freeze-frame context.

Repeat scan after AC and suitable DC charging sessions, regeneration, full-power request and thermal soak.

IONIQ 5: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.

IONIQ 5: Evaluate battery ECU, inverter/e-axle, charging control, DC/DC, brake/ABS and body network together.

IONIQ 5: HV battery SOC and cell/block voltages.

IONIQ 5: Battery-pack temperature sensors.

IONIQ 5: Inverter/e-axle torque and temperature data.

IONIQ 5: Onboard charger / DC fast-charge requested-actual values.

IONIQ 5: DC/DC 12 V supply.

IONIQ 5: HV isolation and contactor states.