What is the battery capacity of Hyundai IONIQ 5 Standard Range RWD 63 kWh?
63 kWh
The cited OEM source lists HV battery capacity for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 63 kWh.
SOURCED MODEL TECHNICAL DATA
Hyundai IONIQ 5 Standard Range RWD 63 kWh Oil, Fluid Capacities & Technical Data
Hyundai IONIQ 5 Standard Range RWD 63 kWh — HV battery capacity: 63 kWh · Drive power: 125 kW · Power: 170 PS Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Hyundai IONIQ 5 Standard Range RWD 63 kWh?
125 kW
The cited OEM source lists Drive power for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 125 kW.
What is the power rating of Hyundai IONIQ 5 Standard Range RWD 63 kWh?
170 PS
The cited OEM source lists Power for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 170 PS.
What is the torque rating of Hyundai IONIQ 5 Standard Range RWD 63 kWh?
350 Nm
The cited OEM source lists Torque for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 350 Nm.
What is the 0-100 km/h value for Hyundai IONIQ 5 Standard Range RWD 63 kWh?
8.5 s
The cited OEM source lists 0-100 km/h for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 8.5 s.
What is the DC fast charge 10-80 value for Hyundai IONIQ 5 Standard Range RWD 63 kWh?
18 min
The cited OEM source lists DC fast charge 10-80 for Hyundai IONIQ 5 Standard Range RWD 63 kWh as 18 min.
Quick technical specification
Drive power
125 kW
Power
170 PS
Torque
350 Nm
0-100 km/h
8.5 s
DC fast charge 10-80
18 min
Oil, fluids, energy and capacities
HV battery capacity
63 kWh
Expected values / measurement references
Drive power
125 kW
Power
170 PS
Torque
350 Nm
HV battery capacity
63 kWh
Model-specific OEM reference checks
IONIQ 5 Standard Range RWD 63 kWh: OEM-published Drive power reference is 125 kW. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
IONIQ 5 Standard Range RWD 63 kWh: OEM-published Power reference is 170 PS. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
IONIQ 5 Standard Range RWD 63 kWh: OEM-published Torque reference is 350 Nm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
IONIQ 5 Standard Range RWD 63 kWh: OEM-published 0-100 km/h reference is 8.5 s. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Reduced DC fast-charge rate or interrupted charging
Range loss, power limitation or battery thermal warning
AWD/drive-system warning or loss of torque at one axle
Measurement and test approach
Log HV battery SOC, pack temperature spread, block/cell voltage deviation, requested and actual DC charge current/voltage on the same time base.
During NACS/AC charging, verify pilot/CP state, onboard-charger input/output power and 12 V DC/DC behavior.
Root-cause discrimination
Differentiate charger-side power limits from vehicle thermal/HV limits by comparing offered charger power, vehicle request and battery temperature together.
For range loss, separate tire/drag, HVAC load and usable battery-energy effects.
DTC / SPN / FMI context
For HV isolation, battery ECU, inverter/e-axle and charging DTCs, do not replace parts without sub-code/freeze-frame context.
Post-repair verification
Repeat scan after AC and suitable DC charging sessions, regeneration, full-power request and thermal soak.
Maintenance / service reference
IONIQ 5: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
IONIQ 5: Evaluate battery ECU, inverter/e-axle, charging control, DC/DC, brake/ABS and body network together.
Sensors, actuators and observation points
IONIQ 5: HV battery SOC and cell/block voltages.
IONIQ 5: Battery-pack temperature sensors.
IONIQ 5: Inverter/e-axle torque and temperature data.
IONIQ 5: Onboard charger / DC fast-charge requested-actual values.
IONIQ 5: DC/DC 12 V supply.
IONIQ 5: HV isolation and contactor states.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.