What is the battery capacity of Hyundai KONA Electric Standard Range?
48.4 kWh
The cited OEM source lists Battery capacity for Hyundai KONA Electric Standard Range as 48.4 kWh.
SOURCED MODEL TECHNICAL DATA
Hyundai KONA Electric Standard Range Oil, Fluid Capacities & Technical Data
Hyundai KONA Electric Standard Range — Battery capacity: 48.4 kWh · Power: 114.6 kW · Power: 156 PS Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Hyundai KONA Electric Standard Range?
114.6 kW
The cited OEM source lists Power for Hyundai KONA Electric Standard Range as 114.6 kW.
What is the power rating of Hyundai KONA Electric Standard Range?
156 PS
The cited OEM source lists Power for Hyundai KONA Electric Standard Range as 156 PS.
What is the torque rating of Hyundai KONA Electric Standard Range?
255 Nm
The cited OEM source lists Torque for Hyundai KONA Electric Standard Range as 255 Nm.
What is the Wheelbase value for Hyundai KONA Electric Standard Range?
2660 mm
The cited OEM source lists Wheelbase for Hyundai KONA Electric Standard Range as 2660 mm.
What is the Length value for Hyundai KONA Electric Standard Range?
4355 mm
The cited OEM source lists Length for Hyundai KONA Electric Standard Range as 4355 mm.
What is the Width value for Hyundai KONA Electric Standard Range?
1825 mm
The cited OEM source lists Width for Hyundai KONA Electric Standard Range as 1825 mm.
What is the Height value for Hyundai KONA Electric Standard Range?
1575 mm
The cited OEM source lists Height for Hyundai KONA Electric Standard Range as 1575 mm.
Quick technical specification
Power
114.6 kW
Power
156 PS
Torque
255 Nm
Wheelbase
2660 mm
Length
4355 mm
Width
1825 mm
Height
1575 mm
Cargo volume up to
466 L
Front trunk
27 L
Charging architecture
400 V
DC 10-80 charge time
41 min
WLTP range up to
377 km
Oil, fluids, energy and capacities
Battery capacity
48.4 kWh
Expected values / measurement references
Power
115 kW
Power
156 PS
Torque
255 Nm
Battery capacity
48 kWh
Model-specific OEM reference checks
KONA Electric Standard Range: OEM-published Power reference is 114.6 kW. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
KONA Electric Standard Range: OEM-published Power reference is 156 PS. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
KONA Electric Standard Range: OEM-published Torque reference is 255 Nm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
KONA Electric Standard Range: OEM-published Wheelbase reference is 2660 mm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Reduced DC fast-charge rate or interrupted charging
Range loss, power limitation or battery thermal warning
AWD/drive-system warning or loss of torque at one axle
Measurement and test approach
Log HV battery SOC, pack temperature spread, block/cell voltage deviation, requested and actual DC charge current/voltage on the same time base.
During NACS/AC charging, verify pilot/CP state, onboard-charger input/output power and 12 V DC/DC behavior.
Root-cause discrimination
Differentiate charger-side power limits from vehicle thermal/HV limits by comparing offered charger power, vehicle request and battery temperature together.
For range loss, separate tire/drag, HVAC load and usable battery-energy effects.
DTC / SPN / FMI context
For HV isolation, battery ECU, inverter/e-axle and charging DTCs, do not replace parts without sub-code/freeze-frame context.
Post-repair verification
Repeat scan after AC and suitable DC charging sessions, regeneration, full-power request and thermal soak.
Maintenance / service reference
KONA Electric: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
KONA Electric: Evaluate battery ECU, inverter/e-axle, charging control, DC/DC, brake/ABS and body network together.
Sensors, actuators and observation points
KONA Electric: HV battery SOC and cell/block voltages.
KONA Electric: Battery-pack temperature sensors.
KONA Electric: Inverter/e-axle torque and temperature data.
KONA Electric: Onboard charger / DC fast-charge requested-actual values.
KONA Electric: DC/DC 12 V supply.
KONA Electric: HV isolation and contactor states.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.