What is the battery capacity of Volkswagen ID.4 Pro Performance?
77 kWh
The cited OEM source lists Net battery capacity for Volkswagen ID.4 Pro Performance as 77 kWh.
SOURCED MODEL TECHNICAL DATA
Volkswagen ID.4 Pro Performance Oil, Fluid Capacities & Technical Data
Volkswagen ID.4 Pro Performance — Net battery capacity: 77 kWh · Power: 150 kW · Power: 204 PS Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Volkswagen ID.4 Pro Performance?
150 kW
The cited OEM source lists Power for Volkswagen ID.4 Pro Performance as 150 kW.
What is the power rating of Volkswagen ID.4 Pro Performance?
204 PS
The cited OEM source lists Power for Volkswagen ID.4 Pro Performance as 204 PS.
What is the torque rating of Volkswagen ID.4 Pro Performance?
310 Nm
The cited OEM source lists Torque for Volkswagen ID.4 Pro Performance as 310 Nm.
What is the WLTP range value for Volkswagen ID.4 Pro Performance?
531 km
The cited OEM source lists WLTP range for Volkswagen ID.4 Pro Performance as 531 km.
What is the Energy consumption value for Volkswagen ID.4 Pro Performance?
16.5 kWh/100km
The cited OEM source lists Energy consumption for Volkswagen ID.4 Pro Performance as 16.5 kWh/100km.
What is the Top speed value for Volkswagen ID.4 Pro Performance?
160 km/h
The cited OEM source lists Top speed for Volkswagen ID.4 Pro Performance as 160 km/h.
What is the 0-100 km/h value for Volkswagen ID.4 Pro Performance?
8.5 s
The cited OEM source lists 0-100 km/h for Volkswagen ID.4 Pro Performance as 8.5 s.
Quick technical specification
Power
150 kW
Power
204 PS
Torque
310 Nm
WLTP range
531 km
Energy consumption
16.5 kWh/100km
Top speed
160 km/h
0-100 km/h
8.5 s
Oil, fluids, energy and capacities
Net battery capacity
77 kWh
Expected values / measurement references
Power
150 kW
Power
204 PS
Torque
310 Nm
Net battery capacity
77 kWh
Model-specific OEM reference checks
ID.4 Pro Performance: OEM-published Power reference is 150 kW. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
ID.4 Pro Performance: OEM-published Power reference is 204 PS. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
ID.4 Pro Performance: OEM-published Torque reference is 310 Nm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
ID.4 Pro Performance: OEM-published WLTP range reference is 531 km. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Reduced DC fast-charge rate or interrupted charging
Range loss, power limitation or battery thermal warning
AWD/drive-system warning or loss of torque at one axle
Measurement and test approach
Log HV battery SOC, pack temperature spread, block/cell voltage deviation, requested and actual DC charge current/voltage on the same time base.
During NACS/AC charging, verify pilot/CP state, onboard-charger input/output power and 12 V DC/DC behavior.
Root-cause discrimination
Differentiate charger-side power limits from vehicle thermal/HV limits by comparing offered charger power, vehicle request and battery temperature together.
For range loss, separate tire/drag, HVAC load and usable battery-energy effects.
DTC / SPN / FMI context
For HV isolation, battery ECU, inverter/e-axle and charging DTCs, do not replace parts without sub-code/freeze-frame context.
Post-repair verification
Repeat scan after AC and suitable DC charging sessions, regeneration, full-power request and thermal soak.
Maintenance / service reference
ID.4: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
ID.4: Evaluate battery ECU, inverter/e-axle, charging control, DC/DC, brake/ABS and body network together.
Sensors, actuators and observation points
ID.4: HV battery SOC and cell/block voltages.
ID.4: Battery-pack temperature sensors.
ID.4: Inverter/e-axle torque and temperature data.
ID.4: Onboard charger / DC fast-charge requested-actual values.
ID.4: DC/DC 12 V supply.
ID.4: HV isolation and contactor states.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.