What is the fuel capacity of Caterpillar 374 Frontless OEM published configuration?
920 L
The cited OEM source lists Fuel tank for Caterpillar 374 Frontless OEM published configuration as 920 L.
SOURCED MODEL TECHNICAL DATA
Caterpillar 374 Frontless OEM published configuration Oil, Fluid Capacities & Technical Data
Caterpillar 374 Frontless OEM published configuration — Fuel tank: 920 L · Cooling system: 71 L · Hydraulic tank: 326 L Sources, symptoms, measurements and verification on one page.
Quick answers
What is the coolant capacity of Caterpillar 374 Frontless OEM published configuration?
71 L
The cited OEM source lists Cooling system for Caterpillar 374 Frontless OEM published configuration as 71 L.
What is the hydraulic capacity or reference value for Caterpillar 374 Frontless OEM published configuration?
326 L
The cited OEM source lists Hydraulic tank for Caterpillar 374 Frontless OEM published configuration as 326 L.
What is the hydraulic capacity or reference value for Caterpillar 374 Frontless OEM published configuration?
896 L/min
The cited OEM source lists Main hydraulic flow for Caterpillar 374 Frontless OEM published configuration as 896 L/min.
What is the hydraulic capacity or reference value for Caterpillar 374 Frontless OEM published configuration?
37000 kPa
The cited OEM source lists Implement hydraulic pressure for Caterpillar 374 Frontless OEM published configuration as 37000 kPa.
What is the torque rating of Caterpillar 374 Frontless OEM published configuration?
298 kNm
The cited OEM source lists Swing torque for Caterpillar 374 Frontless OEM published configuration as 298 kNm.
Quick technical specification
Main hydraulic flow
896 L/min
Implement hydraulic pressure
37000 kPa
Swing torque
298 kNm
Oil, fluids, energy and capacities
Fuel tank
920 L
Cooling system
71 L
Hydraulic tank
326 L
Expected values / measurement references
Main hydraulic flow
896 L/min
Implement hydraulic pressure
37000 kPa
Swing torque
298 kNm
Fuel tank
920 L
Cooling system
71 L
Model-specific OEM reference checks
374 Frontless OEM published configuration: OEM-published Main hydraulic flow reference is 896 L/min. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
374 Frontless OEM published configuration: OEM-published Implement hydraulic pressure reference is 37000 kPa. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
374 Frontless OEM published configuration: OEM-published Swing torque reference is 298 kNm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
374 Frontless OEM published configuration: OEM-published Fuel tank reference is 920 L. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Slow hydraulic functions or stalling under load
High oil temperature, cavitation noise or erratic movement
Asymmetric travel/swing power
Measurement and test approach
Measure main-pump flow and service-port pressure against the manufacturer-published maximum flow/pressure reference at the specified oil temperature and test condition.
Correlate requested pump displacement, engine load, pilot pressure and actuator speed during the same function event.
Root-cause discrimination
Differentiate pump wear from main-valve leakage/setting faults by evaluating stall/deadhead testing with flow and case-drain findings; use OEM procedure for safe limits.
DTC / SPN / FMI context
On electronically controlled pump/valve machines, do not condemn a sensor/solenoid without physical pressure/flow confirmation.
Post-repair verification
Recheck cycle time, pressure/flow, drift and leakage behavior cold and at operating temperature.
Maintenance / service reference
374 Frontless: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
374 Frontless: Evaluate engine ECU, machine controller, pump/valve control and CAN/J1939 network together.
Sensors, actuators and observation points
374 Frontless: Main-pump pressure/flow control.
374 Frontless: Pump displacement / swashplate command.
374 Frontless: Pilot-pressure sensor.
374 Frontless: Main-control-valve spool/solenoid commands.
374 Frontless: Travel/swing pressure and speed feedback.
374 Frontless: Hydraulic-oil temperature.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.