What is the power rating of Caterpillar 242D3 C3.3B DIT?
74.3 hp
The cited OEM source lists Gross power for Caterpillar 242D3 C3.3B DIT as 74.3 hp.
SOURCED MODEL TECHNICAL DATA
Caterpillar 242D3 C3.3B DIT Technical Specs, Power/Torque & Measurements
Caterpillar 242D3 C3.3B DIT — Gross power: 74.3 hp · Gross power SI: 55.4 kW · Engine displacement: 3.3 L Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Caterpillar 242D3 C3.3B DIT?
55.4 kW
The cited OEM source lists Gross power SI for Caterpillar 242D3 C3.3B DIT as 55.4 kW.
What is the engine displacement of Caterpillar 242D3 C3.3B DIT?
3.3 L
The cited OEM source lists Engine displacement for Caterpillar 242D3 C3.3B DIT as 3.3 L.
What is the Operating weight value for Caterpillar 242D3 C3.3B DIT?
3238 kg
The cited OEM source lists Operating weight for Caterpillar 242D3 C3.3B DIT as 3238 kg.
What is the Rated operating capacity value for Caterpillar 242D3 C3.3B DIT?
1000 kg
The cited OEM source lists Rated operating capacity for Caterpillar 242D3 C3.3B DIT as 1000 kg.
Quick technical specification
Gross power
74.3 hp
Gross power SI
55.4 kW
Engine displacement
3.3 L
Operating weight
3238 kg
Rated operating capacity
1000 kg
Expected values / measurement references
Gross power
74.3 hp
Gross power SI
55.4 kW
Engine displacement
3.3 L
Operating weight
3238 kg
Rated operating capacity
1000 kg
Model-specific OEM reference checks
242D3 C3.3B DIT: published Gross power reference is 74.3 hp. Measurements on the same variant/year scope should use this value as the reference.
242D3 C3.3B DIT: published Gross power SI reference is 55.4 kW. Measurements on the same variant/year scope should use this value as the reference.
242D3 C3.3B DIT: published Engine displacement reference is 3.3 L. Measurements on the same variant/year scope should use this value as the reference.
242D3 C3.3B DIT: published Operating weight reference is 3238 kg. Measurements on the same variant/year scope should use this value as the reference.
242D3 C3.3B DIT: published Rated operating capacity reference is 1000 kg. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Slow or weak hydraulic functions
Engine bog or derate while operating implements
Uneven travel or swing performance
Hydraulic overheating
Measurement and test approach
Measure main implement relief pressure at the specified test port using the manufacturer procedure.
Compare pump flow with engine speed under the same hydraulic load.
Record pilot/command signal together with spool or actuator response.
Root-cause discrimination
Separate pump deficiency, relief leakage, valve internal leakage and cylinder/motor internal leakage with dedicated tests.
Separate engine torque limitation from true hydraulic overload using the same event record.
DTC / SPN / FMI context
Preserve machine event codes, J1939 SPN/FMI and implement-controller diagnostic codes with the same timestamp.
Post-repair verification
At hydraulic-oil operating temperature, cycle time, pressure and flow must return to reference behaviour and no new event should appear.
Electrical and network
24 V machine electrical system, engine ECM, machine ECM, implement controller and CAN/J1939 are evaluated together.
Sensors, actuators and observation points
242D3 C3.3B DIT: Main-pump pressure and displacement/command.
242D3 C3.3B DIT: Pilot pressure and implement command.
242D3 C3.3B DIT: Engine speed/load and torque limit.
242D3 C3.3B DIT: Hydraulic-oil temperature and filter restriction.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.